DualDraw Wet Downdraft Tables
Description
The DualDraw Wet Downdraft Table (WC Series) is a specialized air pollution control unit that uses water as its filtration media. Designed primarily to address combustible dust challenges, this solution safely and efficiently collects particles from applications such as grinding, sanding, cutting, and polishing.
The Wet Downdraft Table version within the WC Series provides operators with efficient dust collection while maintaining operator versatility. This is accomplished through the combination of both downdraft and backdraft airflow for superior containment of dust and its pin-hinged, removable side wings that direct airflow yet can open or be removed if required by the particular part being worked or processes being performed.
These table dust collector tables follow NFPA 484 design guidelines and have been independently tested for capture efficiency. Please follow this link to review our Wet Collector Efficiency Report. DualDraw is the only vendor in the marketplace that has had its specific wet downdraft table design tested for particle efficiency. This is critical information to review if you are planning to recycle your exhaust into your facility.
These tabletop dust collectors are specifically designed to endure wet conditions and are available only in 304 Stainless Steel. They come standard with a high/low water alarm and will refill with water automatically based on demand (NFPA 484 requirement). The Wet Downdraft Table comes with our industry-leading multi-year warranty and is available in the standard sizes listed below.
| MODEL | STANDARD AIRFLOW | APPROXIMATE SIZE | WORK SURFACE |
| BG1826-WC | 1600 CFM | 42”D X 34”W X 81”H | 18”D X 26”W |
| BG3036-WC | 3000 CFM | 54”D X 48”W X 92”H | 30”D X 36”W |
| BG3048-WC | 4000 CFM | 60”D X 60”W X 92”H | 30”D X 48”W |
| BG3060-WC | 5000 CFM | 60”D X 72”W X 92”H | 30”D X 60”W |
| BG3072-WC | 6000 CFM | 60”D X 84”W X 92”H | 30”D X 72”W |
| BG3096-WC | 8000 CFM | 60”D X 108”W X 92”H | 30”D X 96”W |
Configuration Options and Accessories:
- Stainless steel work surface consists of removable 16 GA C-Channel grates, reinforced for strength. Average table capacity is 500 to 1000 lbs., can be increased if required.
- Standard components include photohelic pressure gauge to monitor pressure across the impeller, auto-water refill functionality that will feed water to unit on demand, hi/low water audible and visual alarm, fork pockets for easy movement.
- Standard electrical options are 230/460V three phase. 115V/230V Single phase available if needed, please inquire.
- Unit ships complete with sludge rake for material removal. Optional sump vacuum available, please inquire for pricing.
- Standard options and accessories include but are not limited to the following: heavy-duty caster wheels (adds approx.. 4” to height), soft top non-marring work surface, light kit, variable frequency drive (VFD), heavy-duty work surface, custom powder coat epoxy paint finish.
Related products
-
Downdraft Booths
Self Contained Downdraft Booths Using DualDraw ® Airflow TechnologyDualDraw Downdraft Booths (TB Series) are air filtration solutions designed for the protection of your facility and operators through the maximum containment of harmful airborne particles. Critically, downdraft booths also eliminate cross-contamination of plant equipment and processes. Our downdraft spray and paint booth models incorporate the patented DualDraw airflow design of the perforated surface and vented backstop with a flexible panel filter system tailored to your application and process.
The downdraft booth design offers one of our most protective approaches to dust and fume control, making them a solid choice when dealing with particularly hazardous applications. For example, spray painting should always be performed in a well ventilated area. When equipped with our activated carbon filtration package, DualDraw downdraft paint booths protect operators and nearby workers from respiratory harm by containing and eliminating fumes from paints, solvents, and other hazardous materials. Our downdraft paint booth selections are popular with customers experiencing overspray issues that create fume hazards.
The DualDraw approach to quality and performance of downdraft booths is unique in the marketplace. We guarantee your satisfaction no matter what filtration or industrial dust extraction systems you need. Contact DualDraw today.
BrochureRequest a QuoteDrawing MODEL STANDARD AIRFLOW APPROXIMATE SIZE WORK SURFACE TB3036 2000 CFM 30”D X 38”W X 80”H 28.5”D X 36”W TB3048 2500 CFM 30”D X 50”W X 80”H 28.5”D X 48”W TB3060 2500 CFM 30”D X 62”W X 80”H 28.5”D X 60”W TB3060A 4000 CFM 30”D X 80”W X 80”H 28.5”D X 60”W TB3072 2500 CFM 30”D X 74”W X 80”H 28.5”D X 72”W TB3072A 4500 CFM 30”D X 78”W X 80”H 28.5”D X 72”W TB3096 5000 CFM 30”D X 98”W X 80”H 28.5”D X 96”WConfiguration Options and Accessories:
- Standard depth of the downdraft booth is 30”. Can be increased in 5” increments, please specify.
- Standard build material is electro-galvanized steel with a galaxy sparkle finish. Units also available in stainless or aluminum. Work surface consists of 16 GA C-Channel grates, reinforced for strength. Average fume extraction table capacity is 500 to 1000 lbs, can be increased if required.
- Standard components of each downdraft booth include pressure gauge to monitor filter cleanliness, NEMA 12/4X thermally protected manual motor starter, 110 duplex (upon request), and easy access clean-out tray.
- Standard electrical options for the booth are 115/230V single phase or 230/460V three phase.
- Fan, motor, and filtration sub-systems are located under the work surface inside the body of the downdraft booth. Alternatively, an ADA compliant sit-down front is available for sitting operators; sub-systems are attached to the rear or side of the unit. Adds approximately 24” to length or depth to the downdraft booth. This style of downdraft booth is also a good option for hot-work applications generating sparks or intense heat.
- Standard filter configurations include but are not limited to the following: pleated filter package, HEPA filter package, cartridge filter package, fume capture package, or water filtration.
- Standard options and accessories for downdraft booths include, but are not limited to, the following: heavy-duty caster wheels, soft top non-marring work surface, light kit, variable frequency drive (VFD), heavy-duty work surface, custom powder coat epoxy paint finish.
-
Portable Downdraft with Self-Cleaning Filters
Our Industrial Portable Dust Collector with Self-Cleaning Filters combines the superb functionality of the BG Series with a creatively placed self-cleaning cartridge filter system that sits out of the way, below the work surface. This well designed solution provides users with a compact, yet rugged, downdraft table designed for extended use with long-lasting filter life. These are features difficult to find in a downdraft table – so much so that we have a patent pending design on its configuration.
Of course, the BG Series combines downdraft with the signature DualDraw backdraft feature. This gives operators increased efficiency of particle capture by moving captured fume or dust both downward and backward – away from the operator and into the strong filter system. The pin-hinged, removable side wings provide versatility that allow for operators to work on parts in a variety of sizes.
This solution can be applied to many different processes however it is most valuable for heavy-duty use, for example where operations necessitate two to three shifts per day. When equipped with an optional variable frequency drive, air flow can be increased or decreased to optimize to the particular application such as heavy grinding or welding.
Filter cleaning is performed based on an operator initiated, manual push-button pulse that forces air through the cartridge filtration, thus cleaning the filters of debris. Automatic cleaning systems are also available as an option. Debris is then easily cleaned out from the units by emptying the conveniently located front dust tray. No tools are required.
This style of DualDraw downdraft comes with our industry-leading multi-year warranty. Some additional specifics and sizes are listed in the below table and footnotes.
Request a Quote MODEL AIRFLOW APPROXIMATE SIZE WORK SURFACE BG3548IN-SC 2800 CFM 36”D X 52”W X 60”H 35”D X 48”W BG3560IN-SC 3700 CFM 36”D X 64”W X 60”H 35”D X 60”W BG3572IN-SC 4400 CFM 36”D X 76”W X 60”H 35”D X 72”W BG3596IN-SC 5500 CFM 36”D X 100”W X 60”H 35”D X 96”WConfiguration Options and Accessories:
- Standard build material is electro-galvanized steel with a galaxy sparkle finish. Units also available in stainless or aluminum.
- Work surface consists of 16 GA C-Channel grates, reinforced for strength. Average table capacity is 750-1000 lbs, can be strengthened if required.
- Standard components include pressure gauge to monitor filter cleanliness, NEMA 12/4X thermally protected manual motor starter, manual push button pulse.
- Unit comes standard 240V/480V three phase. Electrical connection required. Single phase 115V/230V may be available if required, please inquire.
- Standard filter configurations include a spark arrestor (if hot work is being performed), MERV 10 or MERV 15 Cartridge filter.
- Standard accessories include but are not limited to: soft top non-marring work surface, variable frequency drive (VFD), heavy-duty work surface, filter capacity alarm, epoxy powder coat paint (for other color options, check out our downdraft equipment color options)
-
Downdraft Tables for Combustible Dust Collection, Including Aluminum Dust Collection
DualDraw Downdraft Tables for Combustible Dust Collection are designed to capture hazardous combustible dust, including aluminum dust, in a cost-effective, easy-to-maintain manner. For the industrial dust extraction system line, we start the BG Series with its signature vented back stop and downdraft design. Following design guidelines as outlined in the NFPA Combustible Dust standards such as NFPA 484, 654, and 664, our downdraft tables are then configured specifically to help customers address the hazardous and often costly process of containing airborne combustible dust.
How to most cost-effectively and safely contain combustible dust is an often-debated topic. Regulations vary widely depending on your facility’s geographical location. Enforcement agencies often provide conflicting guidance on the best approach to control dust hazards. Regardless of the confusion surrounding its regulation, the fact remains that airborne combustible dust is extremely dangerous when left unaddressed and that many lives have been lost from explosions directly related to its presence.
What is the DualDraw approach? Our non-spark design and compact air filter area on each industrial dust collector significantly mitigate the hazard associated with combustible dust. Additionally, our careful selection of the proper air filter type based on the details of a customer’s particular application is critical. Finally, we consult closely with our customers to ensure there is a solid understanding of what is involved in owning a combustible dust (like aluminum) collector. For example, customers must have a clear hazard communication program and establish preventative maintenance protocols to ensure their industrial dust collectors are kept in optimal condition with no possibility of fugitive dust build-up.
Our patented designs, combined with specific operational protocols, show how many DualDraw customers are currently safely addressing their combustible dust hazards. See below for some of our more popular industrial dust extraction system models and some details about available accessories and options.
Request a Quote MODEL STANDARD AIRFLOW APPROXIMATE SIZE WORK SURFACE BG3036-AL 2000 CFM 30”D X 38”W X 58”H 28.5”D X 36”W BG3048-AL 2500 CFM 30”D X 50”W X 58”H 28.5”D X 48”W BG3060A-AL 4000 CFM 30”D X 80”W X 58”H 28.5”D X 60”W BG3072A-AL 4500 CFM 30”D X 78”W X 58”H 28.5”D X 72”W BG3096-AL 5000 CFM 30”D X 98”W X 58”H 28.5”D X 96”WStandard Configuration Options and Accessories:
- The standard depth of the industrial dust extractor is 30”. Can be increased in 5” increments, please specify.
- Non-spark build includes a work surface, side wings, and a vented backstop. Fan wheels are AMCA Spark Class B design.
- Non-spark work surface consists of C-Channel grates, reinforced for strength. The average table capacity is 500 to 750 lbs, which can be increased if required.
- Standard components of this industrial dust extractor include a pressure gauge to monitor filter cleanliness, a NEMA 12/4X thermally protected manual motor starter, and an easy-access clean-out tray.
- Standard electrical options for the aluminum dust collector are 115/230V single phase or 230/460V three phase.
- Fan, motor, and air filtration sub-systems are located under the work surface inside the body of the industrial dust extractor (internal space saver) or attached to the back of the unit (as shown above) as a separate sub-system. If attached to the back, the unit complies with ADA requirements for sitting operators and adds approximately 20” to the depth of the unit.
- Standard air filter configurations include pleated prefilters and pleated final filters for aluminum dust collection. HEPA filter option available. No self-cleaning cartridge style is available for this model given the related combustibility concerns.
- Standard options and accessories include but are not limited to the following: hazardous duty Class II, Division I motor, heavy-duty caster wheels, soft top non-marring work surface, light kit, variable frequency drive (VFD), heavy-duty work surface, custom powder coat epoxy paint finish.
-
Wet Downdraft Booths
DualDraw's Wet Downdraft Dust Collector Booths use water as its filtration to capture airborne dust. The "TB" booth style is used for maximum containment of particulate - the design comes standard with the patented DualDraw perforated downdraft work surface, (2) fixed sides, the vented back stop, and an overhead top with a light. The "TB" enclosure is typically used by customers that have standard part sizes that do not vary. This style of wet collector is also useful for processes that require extra visibility, such as an inspection process, where the overhead light is used.
The water filtration used in these Wet Downdraft Dust Collector Booths are typically used to address applications where combustible metal dust is generated – such as grinding, sanding, or deburring materials such as aluminum, titanium or magnesium. The DualDraw design follows NFPA 484 guidelines and is the only wet downdraft design in the market tested for particle capture efficiency. Contact us today for a copy of this report - we would welcome the opportunity to discuss.
Equipment is covered by a multi-year warranty and built to last. 100% constructed of heavy-duty 304 stainless steel, this solution will work for you upon start-up and for many years beyond. We hope to have the opportunity to work with you on your requirement - contact us today to discuss.
BrochureRequest a QuoteDrawing MODEL STANDARD AIRFLOW APPROXIMATE SIZE WORK SURFACE TB1826-WC 1600 CFM 42”D X 34”W X 81”H 18”D X 26”W TB3036-WC 3000 CFM 54”D X 48”W X 92”H 30”D X 36”W TB3048-WC 4000 CFM 60”D X 60”W X 92”H 30”D X 48”W TB3060-WC 5000 CFM 60”D X 72”W X 92”H 30”D X 60”W TB3072-WC 6000 CFM 60”D X 84”W X 92”H 30”D X 72”W TB3096-WC 8000 CFM 60”D X 108”W X 92”H 30”D X 96”WConfiguration Options and Accessories:
- The wet collector's stainless steel work surface consists of removable 16 GA C-Channel grates, reinforced for strength. Average table capacity is 500 to 1000 lbs., can be increased if required.
- Standard components of the wet collector include photohelic pressure gauge to monitor pressure across the impeller, auto-water refill functionality that will feed water to unit on demand, hi/low water audible and visual alarm, fork pockets for easy movement.
- Standard electrical options are 230/460V three phase. 115V/230V Single phase available if needed, please inquire.
- Wet collectors and wet scrubbers ship complete with sludge rake for material removal. Optional sump vacuum available, please inquire for pricing.
- Standard options and accessories for industrial scrubbers include, but are not limited to, the following: heavy-duty caster wheels (adds approx.. 4” to height), soft top non-marring work surface, light kit, variable frequency drive (VFD), heavy-duty work surface, custom powder coat epoxy paint finish.
